PLA – TECH: SCDTL

Affordable TPU Prints, Ender 3 Rebuild Part 5

bjsallee — Sun, 08 Oct 2023 20:51:56 +0000

Finally, a moment to enjoy, a moment to enjoy success, what we've all been waiting for... a full print - Ender 3 Max Neo, Sonic Pad, Creality TPU. Full print, sans a dreaded motherboard upgrade.

Announcing Rebuild Part 4, Ender 3 TPU Series

bjsallee — Fri, 06 Oct 2023 12:31:32 +0000

Fine tuning, break-fix, and reprints. Yes, break-fix steps continue, fine tuning/recalibration, config adjustments, steppers, test prints and more. Largely, considered a failure so far...

Announcing Ender 3 Rebuild Part 2, Valuable Rebuild Tasks

bjsallee — Thu, 21 Sep 2023 20:34:31 +0000

A few steps forward now, we pick up the rebuild with the assembly and backplate. As noted in the previous build, part 1, we reused the backplate and added in the new hardware from the new backplate...

TPU Post Processing

bjsallee — Wed, 20 Sep 2023 22:35:13 +0000

Testing, Slicer Settings, Heat and Bed Adhesion TPU Action – Post Processing Max Neo Upgrades: Post Process Part of the TPU Action Series Now, let’s discuss the ‘post process’ or TPU Post Processing after completing the physical upgrade of the Max Neo 3D Printer. Moving on to the exciting part, we will delve into the […]

Valuable Board and 6 Or More Slicer Downloads

bjsallee — Wed, 20 Sep 2023 20:07:00 +0000

Downloads, Boards, Slicers & More Creality – Ender 3 Max Neo, Halot Sky & Prusa Tech And Tools – Software Support Let’s start with the most important stuff, the upgrade includes a new Board and Slicer Downloads. For future use and for those who need software support. Let’s focus on specifics, especially those of you […]

Approved 3D Max Neo Backplate

bjsallee — Tue, 12 Sep 2023 11:08:37 +0000

Wrong Parts, Wrong Parts Shipped And Received Backplate and Rail Wheels Lab Work – Working Through The Challenges Associated With 3d Printers, Printing, Upgrades and More Relieved my Max Neo Backplate, the long awaited parts are on the truck this morning Quick update, all the parts needed to update the Ender 3 Neo Max to […]

Massive Filament Challenge, 3 Primary Ender Filament Issues

bjsallee — Tue, 27 Jun 2023 00:43:07 +0000

Filament Challenge, Turmoil and More Print Plate Surface Adhesion and Heating Issues Lab Work – Ender Issues Defined A few more weeks of Ender challenges and issues… Ender Filament and Adhesion Issues, are causing a delay in the TPU Neo Max upgrade progress. I will be sharing more Ender ‘lite’ issues, as we continue the […]

Rare Stabilization Issues, Ender 3 Max Neo Filament

bjsallee — Mon, 12 Jun 2023 14:21:07 +0000

Printer Base Stabilization, Adhesion and Print Height Ender 3 Max Neo Filament Solutions Lab Work – TPU Speed and Cycle Times For this article on the Ender 3 Max Neo Filament, specifically how filament adhesion it effected by stabilization and adhesion. A typical print cycle might run between 2 and 5 hours, possibly more. While […]

New Settings and Fixes, A Creality Series

bjsallee — Tue, 14 Feb 2023 20:21:44 +0000

A Makers-space Featuring Creality 3d Printers Creality 3d Printing Series – Ender 3 Neo Max & Halot Sky Lab Work – Creality Settings 3D printing? If you have a need, give us a call. We will be posting a handful of new work in the weeks to come. From testing and prototyping, to 3D model […]